Fox Micron RX+ Bite Alarms: Receiver Only
BC5631
Description
Fox Micron RX+ Receiver Only
Weatherproof sealed case
Digital circuitry
D-Tec™ Plus Sensing System (DTSS)
Low battery drain
CNC machined Tru-Run™ roller wheel
Twin multi-colour LEDs (Red, Green, Blue, Orange, Purple & White)
On / Off toggle switch with 2 operational modes (day and night mode)
When in night mode both LEDs will subtly glow in your chosen colour
High quality cone speaker
Rigid 3/8” stainless steel thread
Rod-friendly rubber inlays
Indexed ergonomic control for volume (8 different levels of volume with lowest setting being completely silent)
Indexed ergonomic control for tone (8 different tone settings: turn dial clockwise to raise pitch and anti-clockwise to lower pitch)
Indexed ergonomic control for Intelligent Sensitivity featuring See-Saw elimination (8 different sensitivity settings – see below Sensitivity table for comparison to NTX-R)
Range test function allows user to check RX+ Receiver is picking up RX+ head at any given range
Low battery warning (LED colour changes to cyan indicating it is time to replace batteries)
Power Out Socket (2.5mm) for use with illuminated Swingers
Supplied with two compression washer options: rigid and soft with an additional spare soft washer per unit
Requires 2 x AA batteries
RX+ Single heads, RX+ Receiver, 2-rod and 3-rod presentation sets also available separately
Improved features compared to NTX-R:
Deeper ears with no increase in the height of the alarm
Twin multi-colour LEDs, one per ear and at the very top of the ear
External control of the multi-colour LEDs with Colour Sync™ function – simply change LED colour via button on the battery cover
Manually selectable day and night modes
External control of the Vari-Bright adjustable LED brightness to suit the conditions you are fishing in (choice of 3 LED brightness settings in day mode and 3 different brightness settings in night mode) simply adjust via button on battery cover
Larger clearance around the roller wheel and improved drainage vastly reduces chances of roller wheel freezing up in extreme cold conditions
Stronger range performance with RX+ Receiver
Improved sensitivity range (see below)
Sensitivity Control
In all sensitivity settings (except maximum), the line must travel the specified distance in the same direction and within 2 seconds in order to trigger the unit. Any movement in the opposite direction will reset the distance counter to zero. This can substantially reduce, or eliminate false triggering caused by wind and water movement.
Line Movement RX+ compared to Line Movement NTX-R
Setting 1 (Min) 90mm 74mm
Setting 2 73mm 56mm
Setting 3 56mm 48mm
Setting 4 34mm 40mm
Setting 5 17mm 32mm
Setting 6 11mm 24mm
Setting 7 5.6mm 16mm
Setting 8 (Max) 2.8mm 8mm
RX+ Receiver
Features
Ultra-Long Range™
Digital circuitry
Low battery drain
Battery life indication when receiver is switched on (4 x green LEDs indicates full/close to full, 3 x green LEDs indicates the batteries are used, but do not need replacing, 2 x orange LEDs indicates the batteries are becoming low, 1 x red LED indicates batteries are low and need replacing)
Low battery warning (LEDs will flash cyan periodically indicating the batteries need replacing)
Alarm low battery warning (when RX+ head turns to low battery warning so will the receiver for that particular alarm, again changing colour to cyan)
Vibration alert function (via switch on rear)
Bivvy light function (via switch on rear, see below for more details)
Anti-theft alarm
Easy RX+ Micron registration (via switch at rear)
Indicator LEDs with Colour Sync™
On/Off & volume control
High quality cone speaker
Lanyard attachment point
Requires 3 x AA batteries
Improved features over NTX-R Receiver
Larger indicator LED windows, visible from both the front and the top of the receiver
Optional bivvy light function when you receive a bite
Free standing design for placing on bivvy table/bucket lid
Soft grip casing
Ability to sync up to eight RX+ Micron heads
Stronger radio performance
Silent ON mode, full receiver function but with no sound output
Bivvy Light function
When the bivvy light feature is turned on via the switch on the back of the receiver it will behave in the following ways:
The indication lights on the receiver will be dimmed slightly to prevent the receiver emitting too much light whilst the bivvy light is active
The bivvy light will only come on if three bite triggers are received in quick succession to prevent liners and false indication turning your bivvy light on unnecessarily
The bivvy light will fade into full brightness and remain on whilst the alarm continues to send trigger signals to the receiver. The light will fade out to nothing in the 5 seconds after the trigger lights have gone out on the receiver as long as no more indications are received
Delivery
Delivery is charged as priced on each order. Once you have placed an order it will be dispatched the same day or the next day depending on the time the order was placed. It will be sent using a next day service. If you wish to cancel your order after it has been dispatched, you will be charged for both delivery and collection cost.
If you are unavailable when our delivery partner tries to deliver your order, they will usually try to deliver again the next working day or they will drop a card in to offer you a collection from a local collection point. If you should refuse delivery of goods, or are not available to accept the delivery on both delivery attempts, you will be required to cover any extra costs incurred.
All quoted delivery prices are for most UK Mainland addresses. Northern Ireland (BT), Isle of Wight (PO30-37), Isle of Man (IM), Scottish Highlands and Orkney Isles (PA, ML, EH, KA, G, KY, PH, DD, AB, IV, KW), Outer Hebrides and the Shetland Isles (HS, ZE) will incur additional charges and may also experience delivery delays; morning, Saturday and "next working day" deliveries are optional and will also incur additional charges.
We will only deliver goods to the address on the order. You may add a safe place for the parcel to be left but without your consent this will not be done.
Availability
All information provided on the products on this website is intended as a guide only. Dimensions and weights are only approximate, as colour. If you are ordering goods that are out of stock we will dispatch them when they are received from our supplier.
On occasion goods are subject to availability and delay in delivery of goods is sometimes outside our control. As such, delivery cannot be guaranteed and any dates we specify for the delivery of the goods are approximate only. We shall not be liable for any losses, costs, damages, charges, or expenses caused by any delay for delivery of the goods.
Returns
Any unwanted items must be sent back at the customer's expense in original packaging and condition. If you wish us to give you a quote for this please send us an e-mail, otherwise return the goods to:
Fishing Tackle Warehouse
Unit 1 Warne Park, Warne Road, Weston-Super-Mare, BS23 3TP
Telephone: 01934 782407
If you are unhappy with the goods received we will refund them if they are sent back at the customer's expense in new resaleable condition within 7 working days along with the original receipt.
We suggest for your own protection you use 1st class registered post.
Any refunds will be issued once we have received the goods, in their original condition. This refund only includes the total of goods sent not the delivery charge.
We will not charge a restocking fee for returned items.
Any goods with manufacturing faults on arrival will be replaced or refunded.
This does not affect your statutory rights.